Crosile Silane Anchoring Agents for Silicone Release Coatings and PET Release Films
Discover Ecopower Crosile® silane anchoring agents for silicone release coatings, PET release films, and silicone PSA applications. Contact us for TDS and formulation support.
Introduction
In silicone release coating applications — from PET release films and PSA tapes to electronic protective films and EV battery insulation — anchoring performance is a critical factor affecting coating durability, release stability, and processing efficiency.
As manufacturers face increasing pressure to reduce VOC emissions and streamline production by eliminating primer steps, demand for high-performance silane anchoring agents continues to grow.
Ecopower's Crosile® Anchoring Agent Series offers targeted solutions for silicone release coatings, PET release films, silicone PSA bonding, and functional composite film applications.
The Challenge: Why Anchoring Performance Matters
Silicone release coatings provide the low surface energy needed for clean release of pressure-sensitive adhesives. However, this same property makes it difficult for the coating to bond firmly to substrates like PET film or release paper.
Poor anchoring can lead to:
- Silicone transfer to the adhesive surface
- Unstable release force
- Coating rub-off during converting
- Migration after high-temperature processing
- Reduced reliability in die-cutting and lamination
A suitable silicone release coating anchoring agent helps maintain the balance between release performance and substrate adhesion — without affecting curing behavior or peel properties.
Ecopower Crosile® Anchoring Agent Series
Ecopower provides four specialized anchoring agents to address different application requirements:
Product Highlights
| Product |
Type / Description |
Key Benefits & Applications |
| Crosile® 6176 |
Solvent-Free Anchorage Enhancer |
Designed for primer-free PET release film applications. 100% active, solvent-free additive. Benchmarked against X-9176. |
| Crosile® 6296 |
Multi-Substrate Silicone Anchor |
Improves bonding between addition-cure silicone rubber and PET, metal, PC, and PA. Ideal for silicone PSA tapes. |
| Crosile® 6297 |
PC-Specific Adhesion Promoter |
Optimized specifically for silicone PSA adhesion to polycarbonate (PC) substrates for electronics and automotive. |
| Crosile® 7697 |
Abrasion-Resistant Silane Copolymer |
Vinyl-epoxy silane copolymer improving anchoring strength and abrasion resistance on PET film. Solvent-free. |
Product Selection Guide
Use the selection table below to choose the optimal Crosile® anchoring agent based on your specific formulation and substrate requirements:
| Your Requirement |
Recommended Product |
| Improve anchoring on unprimed PET film |
Crosile® 6176 / Crosile® 7697 |
| Replace X-9176 anchorage enhancer |
Crosile® 6176 |
| Bond silicone rubber to PET, metal, PC or PA |
Crosile® 6296 |
| Improve silicone PSA adhesion to PC |
Crosile® 6297 |
| Improve abrasion resistance of release coating |
Crosile® 7697 |
| Develop low-VOC, solvent-free systems |
Crosile® 6176 / Crosile® 7697 |
Application Scenarios
Ecopower's silane anchoring agents are tailored for a wide range of industrial sectors requiring high durability and reliable release performance:
| Application Area |
Recommended Products |
| PSA tapes, labels, release liners |
Crosile® 6176 / Crosile® 7697 |
| Electronic & optical protective films |
Crosile® 7697 |
| Silicone PSA bonding to PC / electronics |
Crosile® 6296 / Crosile® 6297 |
| Automotive interior components |
Crosile® 6297 |
| Medical tapes, security labels |
Crosile® 7697 |
| EV battery films, functional composites |
Crosile® 7697 |
Why Choose Ecopower?
- Solvent-free, low-VOC options — Supporting sustainable coating development
- Primer-free processing — Helping reduce cost and improve efficiency
- Application-matched products — Targeted solutions for PET, PC, metal, and multi-substrate bonding
- Quality assurance — IATF 16949 certified, REACH registered, EcoVadis Silver rated
- Technical support — Formulation guidance, sample requests, and application testing available
Get the Technical Data Sheet
Ready to evaluate Crosile® anchoring agents for your silicone release coating system?
Contact us to request:
- Technical Data Sheets (TDS)
- Product samples
- Formulation and application support
Email: sales@ecopowerchem.com Website: www.ecopowerchem.com
Crosile® — Stronger Bonds. Simpler Process. Better Results.
Whatsapp us
